Materials-only supply. Installation is performed by the client's appointed contractor.

Wetroom System

Q: Can LVT or SPC be used inside the shower area?

No. Specify a wetroom vinyl sheet system with welded seams and compatible drains for showers and permanently wet zones.

Q: Do you provide the drain?

We supply drain kits compatible with vinyl welding (system-dependent) or coordinate with your approved drain vendor.

Q: How are corners and upstands formed?

Use preformed internal/external corners and coved skirtings/upstands to achieve continuous waterproof detailing.

Q: What slip rating is required?

Specify wet-area textures and match the R-rating required by local code for showers/changing rooms.

Complete wetroom system: vinyl sheet floors & walls, welded seams, compatible drains, coving & corners. Hygienic, low VOC. Materials‑only B2B supply.

What's Included

We supply materials only to B2B clients (distributors, contractors, developers, architects, FM). Installation is performed by your appointed wetroom contractor to the system manual and local code.

System Components

A wetroom system is a coordinated package of vinyl sheet flooring and wallcoverings with hot‑welded seams, compatible drain kits (linear/point), membranes, coved skirtings/upstands and preformed corners—engineered to create a continuous, watertight and hygienic envelope for showers and permanently wet zones.

Typical applications: healthcare bathrooms, accessible units, MFH and student housing, hotels/spa back‑of‑house, locker rooms and poolside changing (system‑dependent).

Vinyl sheet floor for wet areas with hot‑welded seams.
Waterproof membrane (under or integrated, as specified).
Drain kits: linear or point drains with vinyl‑weldable flanges/clamping rings.
Coved skirting & upstands: preformed/site‑formed with capping strips.
Prefabricated corners: internal/external for reliable detailing.
Vinyl wallcovering / hygienic wall panels with sealed joints.
Ancillaries: welding rods, primers, sealants, trims and adhesives.

Why Choose a System

Assured waterproofing: membrane + welded seams + drain interface designed to work together.
Hygienic surfaces: continuous, grout‑free; clean with neutral detergents/disinfectants.
Accessibility: flush entry, coved junctions and consistent falls to drains.
Slip control: wet‑area textures and defined R‑ratings where required.
Lifecycle value: reduced ingress risk vs. tiled grout; straightforward surface refresh if ever needed.
Aesthetic coordination: unified floor‑to‑wall palette and contrast options for wayfinding.

Technical &
Compliance

Verify exact values and details for your jurisdiction and chosen system (datasheet/DoP/installation manual).

Parameter

Waterproofing
Drains
Slopes
Slip resistance
Fire
Indoor air
Walls
Corners & upstands

Typical Range / Note

Membrane + hot‑welded seams + welded/locked drain interface
Linear/point drains; vinyl‑compatible flanges; clamping rings
Pre‑formed or screeded falls to drains (by installer)
Wet‑area textures; specify R‑rating per local code
Floor typically Bfl‑s1; wall B‑s2,d0 (verify DoP/test)
Low VOC; request certificates (indoor air labels)
Vinyl wallcovering/panels with sealed seams
Preformed corners, coved skirtings, upstands

Design & Detailing Notes

Substrate & falls: ensure flatness and moisture control; plan consistent falls without ponding.
Door thresholds: design flush entries with water barriers as needed; coordinate with corridor finishes.
Penetrations: seal around pipes, rails and benches using compatible collars/sealants.
Wall junctions: continue upstands behind fixtures; maintain welded or sealed joints.
Accessibility contrast: use high‑contrast textures/colours for edges and key zones.

Quick Comparison

Wetroom System vs Modular LVT/SPC in Bathrooms

Criterion

Shower area use
Seam hygiene
Thresholds
Maintenance
Typical use

Wetroom System (Sheet Vinyl)

Yes (welded seams + drains)
Continuous, weldable
Flush/coved
Low (no grout)
Showers, wet rooms, pool changing

LVT/SPC (Modular)

No (not for showers/wet zones)
Joints prone to ingress
Transitions/raised thresholds
Medium (more joints)
Bedrooms, kitchens (non‑wet)

Sector Guidance

Healthcare

Use preformed corners, coved upstands and clinical drain kits; verify chemical resistance for cleaning agents.

MFH & Hospitality

Compact linear drains for ensuite showers; coordinate wall finishes for humidity/steam performance.

Education & Public Facilities

Locker rooms and team showers: robust slip control and corner/edge protection; plan traffic flows to avoid splash zones.

Logistics & B2B Supply

Materials‑only supply. Installation by your wetroom contractor/installer to the system manual.

We supply:

Order sizes:

complete system kits or individual components (floor/wall vinyl, drains, corners, rods).

Lead times:

stock vs made‑to‑order colours and drain types.

Docs:

datasheets, DoP/DoC, fire/slip tests, installation manuals, EPD on request.

Samples:

texture chips, colour boards.

Support:

spec wording, detail drawings, maintenance guides.

FAQ

Here you'll find answers to the most common questions about wetroom systems.

Can LVT or SPC be used inside the shower area?

No. For showers and permanently wet zones, specify a wetroom vinyl sheet system with welded seams and compatible drains.

Do you provide the drain?

We supply drain kits compatible with vinyl welding (system‑dependent) or coordinate with your approved drain vendor.

How are corners and upstands formed?

With preformed corners and coved skirtings/upstands for continuous waterproof detailing.

What slip rating is required?

Specify wet‑area textures and match the R‑rating required by local code for showers/changing rooms.

Do you install?

No—materials only. Installation is by your appointed wetroom contractor.

Ready to specify a Wetroom System?

Request Specs & Commercial Offer (area m², drain type, slope detail, wall finish, timeline).
Order Samples (texture set, colour shortlist).